Connect your Hangers Scanner application with your Hangers Pro cash register

If you have an iPhone *, you can now use it as a shower / order in your store or to track your orders wherever you are (during deliveries for example). 

This article will show you how to connect your iPhone with your tablet.

Let's proceed in stages:

1. If you have not already done so, install the Hangers Scanner application from Testflight. 

Note: If your phone has an older version of the application (prior to version 1.0.6), please delete it from your phone. To do this, press and hold the application icon until the application moves and a grey cross appears. At this point, click on the cross and confirm the deletion of the app).

2. Your tablet must be turned on and the Hangers Pro application launched to make the association.

3. Make sure that Wifi AND Bluetooth are on on the iPhone and tablet.

4. Go to the "Account" general menu (tablet 1) 

Hangers Pro v2.0

5. Go to the submenu "Fitting the Hangers Pro scanner" (tablet 2). The screen below appears. 

Hangers Pro v2.0 

6. Pick up your phone and launch the Hangers Scanner 1.0.6 or later application.

7. Press with your finger on the target. The camera on your phone is on. Place the center of the lens on the QR code displayed on the tablet. A green frame appears over the camera lens to indicate that the code is correct.

Hangers Pro v2.0 

8. Your scanner is connected and now loads your tickets. 

Note: You can pair as many phones as you want at your cash register. However, if you have several stores or branches, your phone will only be able to pair with one of them. To change stores from the same phone, you will need to delete the phone application and repeat this item in point 1.